Requirements for Operation and Safety Precautions of Scissor Lifts

Requirements for Scissor Lift Operation and Safety Precautions

The scissor lift is operated by a specialized person and the machine and person must be securely fixed. The operator must be in good physical health and free of heart disease, high blood pressure, mental illness, severe myopia, acrophobia, and other chronic diseases. The operator must undergo strict professional training and be certified by the manufacturer’s personnel before being allowed to operate the scissor lift.

The preparation work before the operation of the scissor lift includes:

1. Carefully read the safety instructions for the use of the scissor lift to understand the mechanical conditions.
2. Arrange for a dedicated person to monitor the surroundings.
3. Check if there are any obstacles in the work area.
4. Check whether the scissor lift’s battery is fully charged.

Operating requirements during scissor lift operation:

The maximum lifting weight of the Z06W model scissor lift is 320kg, an external dimension of 2450*1180*2240mm. The maximum lifting height is 5.8m, the lifting and descending speed is 3-5m/minute, and the maximum allowed wind speed is 12.5m/s. The total weight of the machine is about 2000kg, the power is supplied by a rechargeable battery with a power of 4.8kw, and the platform size is 2300*1150mm.

1. During the operation of the lifting vehicle, the operator must follow the driver’s commands, and it is strictly forbidden for two people to operate it at the same time. The limit pole must be installed in place, and all support legs must be fully opened.
2. When the goods are placed in the cage of the lifting vehicle, attention should be paid to the even distribution of the load and they should be placed as close to the center of the lifting machine as possible to prevent any excessive weight on one side.
3. When encountering thunderstorms, heavy fog, or heavy rain, it is strictly forbidden to operate the lifting vehicle. Instead, the vehicle should be parked in the designated safe storage area.
4. If the hydraulic brake, brake, or other safety devices malfunction, the lifting vehicle must be stopped immediately, and repaired before continuing to operate.
5. During the lifting process, the operator must not play or walk around on the lifting platform. The safety belt should be firmly hung on the guardrail. Once the lifting platform reaches the working position, the safety belt should be hung above the construction site, and the hanging point should be checked for its firmness.
6. Overloading of the lifting vehicle is strictly prohibited, and the length of the transported materials must not exceed the safe length.
7. The lifting vehicle operator should concentrate on driving and pay attention to signals at all times. In the event of an accident or danger, the vehicle must be stopped immediately.
8. Regular technical inspections, lubrication and daily inspection procedures must be adhered to.
9. Keep a record of any malfunctions and other usage records. If a problem is found, it should be reported immediately and the cause identified. It is forbidden to use the equipment when it is malfunctioning.
10. When leaving the control room, lock the ladder cage door and turn off the power.
11. In the event of natural equipment failure or equipment failure caused by operating errors, the relevant technical personnel of the manufacturer must be notified in a timely manner. It is strictly forbidden to conceal the facts. If any violations are discovered, the responsibility of all the working personnel of the unit will be investigated and punished severely.

Requirements for end-of-work operations:

1. The lift must be lowered to the ground, and the switches inside the cage as well as the main switch on the ground must be turned off. The power should be cut off, and the mechanical power part inside the lift should be inspected for overheating or damage.
2. Clean the lift and ensure that the bumpers are installed neatly.
3. Lock the electrical control box and keep the key safe.
4. After a storm, the lift base, power supply, grounding, and temporary supports must be inspected for safety.

Highlight specific instructions:

1. Scissor lifts must be operated by designated personnel, and personnel must be assigned to each machine.
2. Assign personnel for side monitoring.
3. Operators using the lift should not play or walk back and forth during the ascent. The safety belt should be securely attached to the railing, and after reaching the work position, the safety belt should be attached above the construction area and the attachment point should be checked for security.
4. Lift operators should remain focused, pay attention to signals at all times, and immediately stop in case of accidents or danger.